Heel Up® FIX Long – heel pressure relief protector with support up to the knee area
Heel Up® FIX Long is an inflatable Levabo heel pressure relief device designed to protect the heel during prolonged lying, sitting or selected mobility situations. FIX Long provides extended 48 cm lower-leg support for patients who need a longer contact surface from the heel toward the knee. The wide FIX strap helps the device remain positioned during movement, reducing the need for frequent repositioning.
Mobilex supplies this CE-marked medical device from Łódź, Poland, providing EU-based product documentation, selection support and after-sales communication for healthcare institutions, caregivers and private users.
What is included with Heel Up® FIX Long?
- Heel Up® FIX Long – inflatable heel pressure relief protector.
- Stop Up® inflation band – supports correct first inflation.
- Self-closing valve with inflation adapter/tube – for setup and later air adjustment.
- Hook-and-loop fastening system – secures the foot and lower leg without hard compression.
- Manufacturer packaging: manufacturer bulk pack: 10 pcs; product number 70079.
Key advantages of Heel Up® FIX Long
- Extended 48 cm support – distributes support along a longer part of the lower leg.
- Stable for longer limbs – useful when Medium length does not stay in position reliably.
- FIX strap near the upper calf – helps reduce sliding and twisting during daily care.
- Lightweight PE version – single-patient hygiene with approx. 110 g product weight.
- Heel offloading – lifts or supports the heel approx. 25 mm above the underlying surface.
- Achilles tendon relief – the anatomical channel avoids direct pressure on the Achilles tendon.
- Ankle protection – side walls help protect the malleoli from localised contact pressure.
- Forefoot support – helps reduce drop-foot positioning where the model design includes forefoot support.
- Stop Up® inflation control – supports correct first inflation without a pressure gauge.
- Fast setup – supplied flat and inflated immediately before use.
Who is Heel Up® FIX Long for?
1. Patients with longer lower legs
Choose Long when the 39 cm Medium model is too short for stable positioning.
2. Bedbound patients needing support toward the knee
Provides a longer support surface during prolonged lying.
3. Restless or self-positioning users
The wide FIX strap helps maintain the correct position.
Sizes, fit and positioning
| Model | Dimensions | Best fit | Positioning note |
|---|---|---|---|
| Heel Up® FIX Short | 18 × 32 × 25 cm | Shorter lower legs, seated users, wheelchair positioning | Heel clearance approx. 25 mm |
| Heel Up® FIX Medium | 18 × 39 × 25 cm | Standard adult lower-leg length and stable calf support | Heel clearance approx. 25 mm |
| Heel Up® FIX Long | 18 × 48 × 25 cm | Longer lower legs or support required closer to the knee | Heel clearance approx. 25 mm |
| Heel Up® FIX Max | 18 × 50 × 30 cm | Larger build, oedema or need for higher side walls | Heel support height approx. 28–30 mm |
Fitting rule: the product should remain soft and flexible after inflation. The pressure-relieved body area must be lifted or supported without hard compression, strap marks or localised pressure. Skin condition, device position and air volume should be checked daily according to the care plan.
Setup and safety instructions
- Remove the heel lifter from the clean flat package and unfold it on a stable surface.
- Open the hook-and-loop closure and insert the adapter or blowpipe into the self-closing valve.
- Inflate slowly until the Stop Up® band breaks during first inflation.
- Remove the adapter, close the valve and attach the protective valve cover if supplied.
- Open the side walls gently and place the patient’s foot into the heel lifter.
- Close the white strap and any coloured calf strap so the fit is secure but not tight.
- Check heel clearance by hand and repeat the check daily.
Important safety information: do not overinflate. A hard air cushion does not provide optimal pressure relief and may create unwanted pressure on the limb or soft tissue. Do not use steam cleaning, autoclaves, caustic chemicals, abrasive pads or sharp tools. Replace the product if it loses air, the outer layer is damaged or the fixing system no longer holds securely.
Medical device notice: this is a medical device. Use it according to the instructions for use, the product label and local clinical procedures.
FAQ – Heel Up® FIX Long
What is Heel Up® FIX Long used for?
Heel Up® FIX Long is used to reduce pressure on the heel in patients at risk of heel pressure injuries or requiring supportive heel wound care.
Does it fully offload the heel?
Yes. When correctly inflated and fitted, the heel is lifted approx. 25 mm above the mattress, footrest or support surface, depending on the model.
How should the product feel after inflation?
It should feel soft and flexible, not hard. If the cushion feels rigid, release a small amount of air and check heel clearance again.
How often should heel clearance be checked?
Check heel clearance, air volume, strap tension and skin condition at least once daily or according to local care procedures.
Does it protect the Achilles tendon and ankle bones?
Yes. The anatomical channel relieves the Achilles tendon and provides space around the malleoli while the heel is offloaded.
Can it be used in adjustable beds?
Yes, provided the care team follows bed and side-rail safety procedures to avoid entrapment, pinching and shear forces.
Can it be inflated again if it loses some air?
Yes. Use the supplied adapter, blowpipe or compatible pump to adjust air volume. Replace the product if it loses air repeatedly.
Can the product be disinfected?
Yes. Follow the cleaning and disinfection regime for the specific model. Single-patient PE versions and Multi-Patient TPU/nylon versions have different temperature limits.
Is it suitable for home care?
Yes. It is supplied flat, inflates quickly and can be fitted by a trained caregiver following the instructions for use.
Is it a CE-marked medical device?
Yes. It is a CE-marked Levabo medical device distributed in Poland by Mobilex Sp. z o.o. in Łódź.
Warranty and Mobilex service in Łódź
Heel Up® FIX Long is covered by a limited manufacturer warranty for production defects. Damage caused by overinflation, incorrect cleaning, sharp objects, use contrary to the instructions or normal wear is not covered.
| Technical specification – Heel Up® FIX Long | |
|---|---|
| Dimensions | 18 × 48 × 25 cm |
| Use | Single patient, up to 8 weeks |
| Function / distinguishing feature | Full heel offloading; two supporting chambers with an anatomical channel for the Achilles tendon; ankle protection. FIX version adds a wide fixation strap for active, seated and restless patients, including wheelchair users; extended length (48 cm) |
| Washing | Machine or hand wash 60–65 °C (max 65 °C); deflate before washing; no tumble drying; do not steam-clean or autoclave |
| Disinfection | Spray with a suitable disinfectant or wipe with spirit / isopropyl alcohol on a damp cloth |
| Material | PE nonwoven, 100% PE, hypoallergenic |
| Article no. | 70079 |
| Certification | Class I medical device, MDR 2017/745 (Rule 1); CE marking (Annex V, no notified body number); UDI per Annex VI. Standards: ISO 13485, ISO 14971, ISO 10993-1/5/10, ISO 15223-1, ISO 2859; tested to ISO 10993-10:2010 |